Quick answer
Step-by-step install guide for a custom car badge. 90-second install with 3M™ adhesive, no drilling required.
What You'll Need
- Your Badge My Auto badge
- Isopropyl alcohol wipe (included)
- Clean microfiber cloth
Step-by-Step Installation
- Clean the surface with the included alcohol wipe and let dry fully.
- Peel the red backing off the 3M™ adhesive tape on the badge back.
- Hold the badge 1 inch from the surface and align carefully, you only get one clean placement.
- Press firmly across the entire badge for 30 seconds.
- Let sit 24 hours before washing for full bond strength.
Tips for a Perfect Install
- Install at room temperature. Cold surfaces (under 50°F) weaken initial bond.
- Avoid curved surfaces, our badges mount flat. For convex grilles, contact us for a flex-mount option.
- Don't install over vinyl wraps or matte paint without confirming adhesive compatibility first.