Badges / Toyota GR86
Toyota Badges
Custom Badge for Your Toyota GR86
5" wide · Chrome finish
The GR86 is a lightweight rear wheel drive coupe developed jointly with Subaru, and it was built around balance rather than outright power. That focus attracts owners who modify carefully, and a badge is one of the least invasive ways to do it.
The GR86 was co-developed with Subaru and shares its platform with the BRZ, which is why the two are so often discussed together.
Ships Worldwide
Finishes
Finishes built for the Toyota GR86
Chrome
Mirror-bright and unmistakable. Chrome reads clean against factory paint and catches light from across a parking lot, which is why it is the closest match to most factory badging.
Matte Black
A murdered-out look that disappears into blacked-out trim and grilles. Matte black keeps your GR86 looking factory-plus instead of flashy.
Gold
Warm, high-contrast, and impossible to ignore on darker paint. Gold is the move when you want the badge itself to be the statement piece.
Premium Acrylic Colors
Color-matched acrylic badges in a deep gloss finish, ideal for pairing with a wrap or a custom paint code. Same depth, same adhesive, more color freedom.
Which finish for a GR86? Keep it small and matte black on a GR86: the car is compact and understated, and a large bright badge fights the shape.
Installation
How to install your badge
- 01
Clean the surface
Wipe the mounting area with the included isopropyl alcohol pad and let it dry fully. Wax and road film are the only real enemies of a strong bond.
- 02
Peel the 3M backing
Pull the red liner off the automotive-grade 3M adhesive on the back of the badge. Avoid touching the exposed tape.
- 03
Line it up
Hold the badge about an inch off the panel and check your spacing left to right before it makes contact. Painter's tape makes a great alignment guide.
- 04
Press for 30 seconds
Press firmly across the whole badge for a full 30 seconds. Full bond strength is reached in 24 hours, so hold off on washing until then.
No drilling, no brackets, no body shop. The adhesive is paint safe and removable, so your GR86 stays exactly the way you found it if you ever change your mind.
Inspiration
Popular badge ideas for the GR86
Stuck on wording? Here are four starting points for a GR86. Tap one to open it in the builder, then make it yours.
The strongest badges are short: the model name, an owner nickname, a trim or build name, or a phrase your passengers already know you for.
Related
More Toyota badges
Toyota
Tacoma
Toyota
Tundra
Toyota
4Runner
Toyota
RAV4
Toyota
Sequoia
Toyota
Camry
Toyota
Corolla
Toyota
Highlander
See every model on the Toyota badge hub or browse custom badges by vehicle.
Answers
Frequently Asked Questions
Will a custom badge fit my Toyota GR86?
Yes. Our badges use industrial-grade 3M™ adhesive and mount on any clean, flat, painted surface, grille, trunk lid, tailgate, or fenders.
How do I attach a badge to my Toyota GR86 without drilling?
Peel the backing off the included 3M™ tape, align your badge, press firmly for 30 seconds. Bond reaches full strength within 24 hours.
Can I remove a Badge My Auto emblem without damaging my GR86's paint?
Yes. Use a plastic pry tool and dental floss to work under the badge, then use adhesive remover to clean the residue. Zero paint damage.
What finishes are available for Toyota GR86 badges?
Chrome, matte black, gold and colored acrylic. Keep it small and matte black on a GR86: the car is compact and understated, and a large bright badge fights the shape.
What should I put on a GR86 badge?
Anything you want. Starting points for a GR86 include REAR DRIVE, LIGHT AND LOW, BACK ROADS, or simply a name, a number or a place. The builder shows a live preview before you order.
How long does shipping take?
Production takes 3 to 5 business days, then delivery is 2 to 5 business days. Shipping is a flat $8.99 per order.