Badges / Tesla Cybertruck
Tesla Badges
Custom Badge for Your Tesla Cybertruck
5" wide · Chrome finish
The Cybertruck is stainless steel, unpainted, and made entirely of flat panels, which means it looks like nothing else on the road already. A custom badge is one of the few ways to add a personal mark to a surface that was never meant to carry decoration.
The Cybertruck's body panels are bare stainless steel rather than painted sheet metal, a genuinely unusual choice among production vehicles.
Ships Worldwide
Finishes
Finishes built for the Tesla Cybertruck
Chrome
Mirror-bright and unmistakable. Chrome reads clean against factory paint and catches light from across a parking lot, which is why it is the closest match to most factory badging.
Matte Black
A murdered-out look that disappears into blacked-out trim and grilles. Matte black keeps your Cybertruck looking factory-plus instead of flashy.
Gold
Warm, high-contrast, and impossible to ignore on darker paint. Gold is the move when you want the badge itself to be the statement piece.
Premium Acrylic Colors
Color-matched acrylic badges in a deep gloss finish, ideal for pairing with a wrap or a custom paint code. Same depth, same adhesive, more color freedom.
Which finish for a Cybertruck? Matte black is the standout pick here: it reads as intentional contrast against bare stainless, where chrome tends to blend into the panel and vanish.
Installation
How to install your badge
- 01
Clean the surface
Wipe the mounting area with the included isopropyl alcohol pad and let it dry fully. Wax and road film are the only real enemies of a strong bond.
- 02
Peel the 3M backing
Pull the red liner off the automotive-grade 3M adhesive on the back of the badge. Avoid touching the exposed tape.
- 03
Line it up
Hold the badge about an inch off the panel and check your spacing left to right before it makes contact. Painter's tape makes a great alignment guide.
- 04
Press for 30 seconds
Press firmly across the whole badge for a full 30 seconds. Full bond strength is reached in 24 hours, so hold off on washing until then.
No drilling, no brackets, no body shop. The adhesive is paint safe and removable, so your Cybertruck stays exactly the way you found it if you ever change your mind.
Inspiration
Popular badge ideas for the Cybertruck
Stuck on wording? Here are four starting points for a Cybertruck. Tap one to open it in the builder, then make it yours.
The strongest badges are short: the model name, an owner nickname, a trim or build name, or a phrase your passengers already know you for.
Related
More Tesla badges
See every model on the Tesla badge hub or browse custom badges by vehicle.
Answers
Frequently Asked Questions
Will a custom badge fit my Tesla Cybertruck?
Yes. Our badges use industrial-grade 3M™ adhesive and mount on any clean, flat, painted surface, grille, trunk lid, tailgate, or fenders.
How do I attach a badge to my Tesla Cybertruck without drilling?
Peel the backing off the included 3M™ tape, align your badge, press firmly for 30 seconds. Bond reaches full strength within 24 hours.
Can I remove a Badge My Auto emblem without damaging my Cybertruck's paint?
Yes. Use a plastic pry tool and dental floss to work under the badge, then use adhesive remover to clean the residue. Zero paint damage.
What finishes are available for Tesla Cybertruck badges?
Chrome, matte black, gold and colored acrylic. Matte black is the standout pick here: it reads as intentional contrast against bare stainless, where chrome tends to blend into the panel and vanish.
What should I put on a Cybertruck badge?
Anything you want. Starting points for a Cybertruck include STAINLESS, NO PAINT NEEDED, ANGLES ONLY, or simply a name, a number or a place. The builder shows a live preview before you order.
How long does shipping take?
Production takes 3 to 5 business days, then delivery is 2 to 5 business days. Shipping is a flat $8.99 per order.