Badges / Mazda MX-5 Miata
Mazda Badges
Custom Badge for Your Mazda MX-5 Miata
5" wide · Chrome finish
The MX-5 Miata has been a small, light, two seat rear wheel drive roadster since 1989, and it is one of the most consistently loved sports cars ever built. Owners name these cars, and a badge is how that name gets onto the bodywork.
The MX-5 has been in continuous production since 1989 and has a large, long established owner club and track day community around it.
Ships Worldwide
Finishes
Finishes built for the Mazda MX-5 Miata
Chrome
Mirror-bright and unmistakable. Chrome reads clean against factory paint and catches light from across a parking lot, which is why it is the closest match to most factory badging.
Matte Black
A murdered-out look that disappears into blacked-out trim and grilles. Matte black keeps your MX-5 Miata looking factory-plus instead of flashy.
Gold
Warm, high-contrast, and impossible to ignore on darker paint. Gold is the move when you want the badge itself to be the statement piece.
Premium Acrylic Colors
Color-matched acrylic badges in a deep gloss finish, ideal for pairing with a wrap or a custom paint code. Same depth, same adhesive, more color freedom.
Which finish for a MX-5 Miata? On a car this small keep the badge modest: a one inch height in chrome or matte black suits the proportions far better than anything larger.
Installation
How to install your badge
- 01
Clean the surface
Wipe the mounting area with the included isopropyl alcohol pad and let it dry fully. Wax and road film are the only real enemies of a strong bond.
- 02
Peel the 3M backing
Pull the red liner off the automotive-grade 3M adhesive on the back of the badge. Avoid touching the exposed tape.
- 03
Line it up
Hold the badge about an inch off the panel and check your spacing left to right before it makes contact. Painter's tape makes a great alignment guide.
- 04
Press for 30 seconds
Press firmly across the whole badge for a full 30 seconds. Full bond strength is reached in 24 hours, so hold off on washing until then.
No drilling, no brackets, no body shop. The adhesive is paint safe and removable, so your MX-5 Miata stays exactly the way you found it if you ever change your mind.
Inspiration
Popular badge ideas for the MX-5 Miata
Stuck on wording? Here are four starting points for a MX-5 Miata. Tap one to open it in the builder, then make it yours.
The strongest badges are short: the model name, an owner nickname, a trim or build name, or a phrase your passengers already know you for.
Answers
Frequently Asked Questions
Will a custom badge fit my Mazda MX-5 Miata?
Yes. Our badges use industrial-grade 3M™ adhesive and mount on any clean, flat, painted surface, grille, trunk lid, tailgate, or fenders.
How do I attach a badge to my Mazda MX-5 Miata without drilling?
Peel the backing off the included 3M™ tape, align your badge, press firmly for 30 seconds. Bond reaches full strength within 24 hours.
Can I remove a Badge My Auto emblem without damaging my MX-5 Miata's paint?
Yes. Use a plastic pry tool and dental floss to work under the badge, then use adhesive remover to clean the residue. Zero paint damage.
What finishes are available for Mazda MX-5 Miata badges?
Chrome, matte black, gold and colored acrylic. On a car this small keep the badge modest: a one inch height in chrome or matte black suits the proportions far better than anything larger.
What should I put on a MX-5 Miata badge?
Anything you want. Starting points for a MX-5 Miata include TOP DOWN, TWO SEATS, BACK ROADS, or simply a name, a number or a place. The builder shows a live preview before you order.
How long does shipping take?
Production takes 3 to 5 business days, then delivery is 2 to 5 business days. Shipping is a flat $8.99 per order.